
PC VYLOPET® EMC333 TOYOBO CO., LTD.
Typical Applications:
Electrical appliances bathroom accessories
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical appliances | bathroom accessories |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| tensile strength | 23°C | ASTM D638 | 152 | MPa |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 80.0 | J/m |
| Bending modulus | 23°C | ASTM D790 | 10000 | MPa |
| bending strength | 23°C | ASTM D790 | 220 | MPa |
| Elongation at Break | 23°C | ASTM D638 | 2.2 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | 熔点 | 255 | °C | |
| MD | ASTM D696 | 3E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 225 | °C |
| 0.45MPaUnannealed | ASTM D648 | 245 | °C | |
| Linear coefficient of thermal expansion | 最大使用温度 | ASTMUL746B | 130 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570 | 0.050 | % | |
| Shrinkage rate | TD | ASTM D995 | 0.90 | % |
| MD | ASTM D995 | 0.30 | % | |
| density | ASTM D792 | 1.59 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | 耐电弧性 | ASTM D495 | 130 | s |
| Dielectric strength | 2.00mm | ASTM D149 | 25.0 | KV/mm |
| Volume resistivity | ASTM D257 | 1E+16 | Ω.cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | ASTM D785 | 95 | M(Scale) | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | HB | - |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.