
ABS 266 Ineos ABS
Properties:
High clarity and good resilience
Typical Applications:
Consumer applications sheaths lawn and garden equipment toys
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Consumer applications | sheaths | lawn and garden equipment | toys |
| Properties: | High clarity and good resilience |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| melt mass-flow rate | 230℃,3.8kg | ASTM D-1238 | 5.0 | g/10min |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ASTM D-638 | 1970 | MPa | |
| tensile strength | Yield | ASTM D-638 | 37.2 | MPa |
| Break | ASTM D-638 | 29.0 | MPa | |
| elongation at yield | ASTM D-638 | 4.0 | % | |
| elongation | Break | ASTM D-638 | 48 | % |
| Bending modulus | ASTM D-790 | 1770 | MPa | |
| bending strength | Yield | ASTM D-790 | 58.6 | MPa |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 176 | J/m |
| Rockwell hardness | ASTM D-785 | 108 | R scale | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed,3.18mm | ASTM D-648 | 86.7 | ℃ |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.00012 | cm/cm℃ | |
| Combustibility | 1.50mm | HB | UL 94 | |
| Hot deformation temperature | 0.45MPa,Unannealed,12.7mm | ASTM D-648 | 93.9 | ℃ |
| 1.80MPa,Unannealed,3.18mm | ASTM D-648 | 72.8 | ℃ | |
| 1.80MPa,Unannealed,12.7mm | ASTM D-648 | 82.2 | ℃ | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | ASTM D-955 | 0.40-0.60 | % | |
| density | ASTM D-792 | 1.08 | g/cm3 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.