Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
Shrinkage rate | | ASTM D955 | 0.30 % |
density | | ASTM D792 | 1.53 g/cm³ |
Shrinkage rate | | ASTM D955 | 0.30 % |
Shrinkage rate | | ASTM D955 | 0.90 % |
density | | ASTM D792 | 1.53 g/cm³ |
Shrinkage rate | | ASTM D955 | 0.90 % |
hardness | Test Condition | Test Method | Test Result |
---|
Rockwell hardness | R-Scale | ASTM D785 | 120 |
Rockwell hardness | R-Scale | ASTM D785 | 120 |
flammability | Test Condition | Test Method | Test Result |
---|
UL flame retardant rating | | UL 94 | HB |
UL flame retardant rating | | UL 94 | HB |
UL flame retardant rating | | UL 94 | HB |
UL flame retardant rating | | UL 94 | HB |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
WeatherResistance | | ASTM D570 | 0.060 % |
WeatherResistance | | ASTM D570 | 0.060 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
elongation | Break | ASTM D638 | 2.5 % |
tensile strength | | ASTM D638 | 130 MPa |
elongation | Break | ASTM D638 | 2.5 % |
Flexural modulus | | ASTM D790 | 7500 MPa |
bending strength | | ASTM D790 | 180 MPa |
tensile strength | | ASTM D638 | 130 MPa |
Flexural modulus | | ASTM D790 | 7500 MPa |
bending strength | | ASTM D790 | 180 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D256 | 100 J/m |
Impact strength of cantilever beam gap | | ASTM D256 | 100 J/m |
Electrical performance | Test Condition | Test Method | Test Result |
---|
Volume resistivity | | ASTM D257 | 1E+16 ohms·cm |
Volume resistivity | | ASTM D257 | 1E+16 ohms·cm |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTM D648 | 220 °C |
Heat distortion temperature | | ASTM D648 | 210 °C |
Heat distortion temperature | | ASTM D648 | 220 °C |
Heat distortion temperature | | ASTM D648 | 210 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.