ABS 633 Ineos ABS
0
- Properties:633 resin is a general-purpose injection grade ABS resin (acrylonitrilebutadienestyrene) with high glossiness and good flowability
- Usages:Automotive applicationssheathstoys
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.05 g/cm3 | |
| Shrinkage rate | ASTM D-955 | 0.40-0.60 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D-253 | 90 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 15 g/10min | |
| ASTM D-1238 | 4.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D-638 | 2200 MPa | |
| tensile strength | ASTM D-638 | 41.3 MPa | |
| Flexural modulus | ASTM D-790 | 2200 MPa | |
| bending strength | ASTM D-790 | 65.5 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 64.1 J/m | |
| ASTM D-256 | 347 J/m | ||
| Rockwell hardness | ASTM D-785 | 109 R scale |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 97.0 ℃ | |
| vicat | ASTM D-1525 | 106 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000090 cm/cm℃ | |
| combustibility | UL 94 | HB | |
| UL 94 | HB | ||
| Heat distortion temperature | ASTM D-648 | 96.0 ℃ | |
| ASTM D-648 | 102 ℃ | ||
| ASTM D-648 | 85.0 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top