Share
Add to compare
plas
Material Selector
Log In
CategoriesAll
Home
Plastic Datasheets
PC

PC 2805(蓝底) COVESTRO THAILAND

51

Form：Granules | Grade：Injection grade

Properties:
currencyMedium viscosityMedium viscosityFor general injection mol
Typical Applications:
Industrial applicationsElectrical fieldElectronic fieldAutomotive sectorUsed for industrial accessoriesAutomotive electronic componentsElectronic and electrical accessories; ul certific
Supplier(1)
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Industrial applications | Electrical field | Electronic field | Automotive sector | Used for industrial accessories | Automotive electronic components | Electronic and electrical accessories; ul certific
Properties:currency | Medium viscosity | Medium viscosity | For general injection mol

Certificates

No Data...

Technical Data Sheet

otherTest ConditionTest MethodTest ResultTest Unit
Water absorption rate在23℃水中，Saturation值ISO 620.30%
Water absorption rate23℃：50%rh，静态均衡值ISO 620.12%
density--ISO 11831200kg/m2
Specific properties of raw materialsTest ConditionTest MethodTest ResultTest Unit
Refractive index过程AISO 4891.586--
Transmittance rate1毫米ISO 13468-289%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Elongation at Break23℃/50%r.h 50毫米/分钟ISO 527-1-2＞50%
Fracture stress23℃/50%r.h 5毫米/分钟ISO 527-1-2--MPa
Fracture strain23℃/50%r.h 5毫米/分钟ISO 527-1-2--%
Tensile creep modulus23℃/50%r.h 1hrISO 899-12200MPa
Tensile creep modulus23℃/50%r.h 1000hrISO 899-11900MPa
Bending modulus23℃/50%r.h 2毫米/分钟ISO 1792400MPa
Charpy Notched Impact Strength23℃/50%r.hISO 179/1eUNkJ/m²
Charpy Notched Impact Strength23℃/50%r.h ；3毫米kJ/m²参照ISO 179/1eA75P(C)
Impact strength of cantilever beam gap23℃/50%r.h ；3.2毫米kJ/m²参照ISO 180/1eA85P(C)
Maximum destructive power23℃/50%r.hISO 6603-25400N
tensile strength23℃/50%r.h，BreakISO 6603-260J
Tensile modulus23℃/50%r.h 1毫米/分钟ISO 527-1-22400MPa
Tensile stress23℃/50%r.h 50毫米/分钟，YieldISO 527-1-266MPa
Tensile strain23℃/50%r.h 50毫米/分钟，YieldISO 527-1-26.1%
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Glass transition temperature10℃/毫米ISO 11357-1-2145℃
Vicat softening temperature50N；50℃/hrISO 306145℃
Linear coefficient of thermal expansion23-55℃，FlowISO 11359-1-20.6510-4/K
Linear coefficient of thermal expansion23-55℃，垂直ISO 11359-1-20.6510-4/K
UL flame retardant rating1.5毫米UL 94V-2级
UL flame retardant rating厚度UL 94HB(2.5)级
Extreme Oxygen IndexA溶液ISO 4589-227%
Glow wire combustion index (GWFI)1.5毫米IEC 60695-2-12850℃
Glow wire combustion index (GWFI)1.0毫米IEC 60695-2-12930℃
Glow wire ignition temperature (GWIT)1.5毫米IEC 60695-2-13875℃
Glow wire ignition temperature (GWIT)3.0毫米IEC 60695-2-13875℃
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
melt mass-flow rate250℃；2.16kgISO 1133--cm3/(10分钟)
melt mass-flow rate300℃；1.2kgISO 11339.5cm3/(10分钟)
Shrinkage rate60*60*2；500bar，FlowISO 294-40.65%
Shrinkage rate60*60*2；500bar，垂直ISO 294-40.7%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Dielectric constant23℃/50%r.h 100HzIEC 602503.1--
Dielectric constant23℃/50%r.h 1MHzIEC 602503.0--
Dissipation factor23℃/50%r.h 100HzIEC 60250510-4
Dissipation factor23℃/50%r.h 1MHzIEC 602509010-4
Volume resistivity23℃/50%r.hIEC 600931E+14Ohm.m
Surface resistivity23℃/50%r.hIEC 600931E+16Ohm
Dielectric strength23℃/50%r.h 1毫米IEC 60243-134kv/毫米
Compared to the Leakage Traceability Index (CTI)23℃/50%r.h 方法AIEC 60112250等级
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top