PSU UDEL® P-1700 GY8057 SOLVAY USA

Properties:
dimensional stability
Electron beam disinfectio
Radiopable
Radiation disinfection
Pressure cooker disinfect
Good disinfection perform
Ethylene oxide disinfecti
Anti gamma radiation
Chemical resistance
Alkali resistant
Alcohol resistance
heat-resisting
Acid resistance
Resistance to hydrocarbon
Detergent resistant
Steam resistant
Thermal disinfection
High toughness
Biocompatibility
Food contact compliance
Hydrolysis resistance
Disinfect with steam
Excellent appearance
Usages:
Electrical field
Electronic field
Electrical components
Electrical appliances
valve
Valve components
Industrial components
Pipeline components
Pipeline components
Home appliance components
Automotive sector
Food service sector
Surgical instruments
Microwave cooker
Dental application field
Medical supplies
Nursing supplies
Medical devices
Medical devices
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
density		ASTMD792	1.24	g/cm³
Melt mass flow rate	343°C/2.16kg	ASTMD1238	6.5	g/10min
Shrinkage rate	MD	ASTMD955	0.70	%
Water absorption rate	24hr	ASTMD570	0.30	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile modulus		ASTMD638	2480	Mpa
tensile strength		ASTMD638	70.3	Mpa
elongation	断裂	ASTMD638	50to100	%
Bending modulus		ASTMD790	2690	Mpa
bending strength		ASTMD790	106	Mpa
Impact strength of cantilever beam gap		ASTMD256	69	J/m
Tensile impact strength		ASTMD1822	420	kJ/m²

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	1.8MPa,未退火	ASTMD648	174	°C
Linear coefficient of thermal expansion	MD	ASTMD696	5.6E-05	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Volume resistivity		ASTMD257	3E+16	ohms·cm
Dielectric strength		ASTMD149	17	KV/mm
Dielectric constant	60Hz	ASTMD150	3.03
	Dielectric constant	1kHz	ASTMD150	3.04
	Dielectric constant	Dielectric constant	1MHz	ASTMD150	3.02
Dissipation factor	60Hz	ASTMD150	7E-04
	Dissipation factor	1kHz	ASTMD150	1E-03
	Dissipation factor	Dissipation factor	1MHz	ASTMD150	6E-03

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5mm,ALL	UL94	HB
UL flame retardant rating	UL flame retardant rating	4.5mm,NC	UL94	V-0
Burning wire flammability index	0.8mm	IEC60695-2-12	850	°C
Burning wire flammability index	Burning wire flammability index	1.6to6.0mm	IEC60695-2-12	960	°C
Hot filament ignition temperature	0.8mm	IEC60695-2-13	875	°C
Hot filament ignition temperature	Hot filament ignition temperature	1.6to6.0mm	IEC60695-2-13	850	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PSU UDEL® P-1700 GY8057 SOLVAY USA

Technical Data Sheet

You May Like