PP INNOPOL® PP CS 1-3000 DEL
0
- Usages:Application in the automotive field
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 1.2 % | |
| density | ISO 1183 | 0.920 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 7.0 g/10min | |
| Melt volume flow rate | ISO 1133 | 10.0 cm³/10min | |
| Shrinkage rate | ISO 294-4 | 0.96 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | FMVSS302 | HB | |
| FMVSS302 | + |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 1450 MPa | |
| tensile strength | Yield | ISO 527-2/50 | 36.0 MPa |
| Tensile strain | Yield | ISO 527-2/50 | 8.0 % |
| Nominal tensile fracture strain | ISO 527-2 | 14 % | |
| Flexural modulus | ISO 178 | 2600 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 1.2 kJ/m² | |
| ISO 179/1eA | 3.7 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 17 kJ/m² | |
| ISO 179/1eU | 无断裂 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 54.0 °C | |
| vicat | ISO 306/A120 | 153 °C | |
| ISO 306/B120 | 94.0 °C | ||
| melting temperature | ISO 11357-3 | 162 °C | |
| Heat distortion temperature | ISO 75-2/B | 101 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top