
PC 1303-10C LG CHEM KOREA
72
Form:Granules | Grade:Halogen-free flame retardant grade
Properties:
Weather resistance
Product Description
Certificates(1)
Datasheet
Product Description
| Properties: | Weather resistance |
Certificates

Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| turbidity | ASTM D1003 | 0.70to1.5 | % | |
| transmissivity | ASTM D1003 | 89.0 | % | |
| Refractive index | ASTM D542 | 1.586 | ||
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
| InstrumentedDartImpact | 23°C,3.20mm,TotalEnergy | ASTM D3763 | 87.0 | J |
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 900 | J/m |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Average degree of combustion | ASTM D635 | 3 | CM | |
| Extreme Oxygen Index | ASTM D2863 | 26 | % | |
| Ignition temperature of heating wire | 2.0mm | IEC 60695-2-13 | 850 | °C |
| UL flame retardant rating | 3.0mm | UL 94 | HB | |
| 1.5mm | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Wear resistance | 雾度变化 | Kg/m | 45 | % |
| bending strength | ASTM D790 | 96.0 | Mpa | |
| Bending modulus | ASTM D790 | 2410 | Mpa | |
| elongation | Break | ASTM D638 | 150 | % |
| Yield | ASTM D638 | 6.0 | % | |
| tensile strength | Ultimate | ASTM D638 | 71.0 | Mpa |
| Yield | ASTM D638 | 60.0 | Mpa | |
| Tensile modulus | ASTM D638 | 2410 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Annealed,4.00mm | ASTM D648 | 144 | °C |
| 1.8MPa,Unannealed,4.00mm | ASTM D648 | 128 | °C | |
| 1.8MPa,Annealed,4.00mm | ASTM D648 | 141 | °C | |
| Vicat softening temperature | ASTM D15255 | 149 | °C | |
| Ball pressure temperature | IEC 60598-1 | >125 | °C | |
| Linear coefficient of thermal expansion | MD:-40to82°C | ASTM D696 | 6.8E-05 | cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium,23°C,50%RH | ASTM D570 | 0.32 | % |
| 23°C,24hr | ASTM D570 | 0.15 | % | |
| Shrinkage rate | MD | ASTM D955 | 0.50-0.70 | % |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 10 | g/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | 23°C | ASTM D257 | 2E+17 | ohms·cm |
| Dielectric strength | ASTM D149 | 17 | KV/mm | |
| Dielectric constant | 60Hz | ASTM D150 | 3.00 | |
| Dissipation factor | 60Hz | ASTM D150 | 1E-03 | |
| Compared to the anti leakage trace index | 2.00mm | IEC 60112 | PLC 2 | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Sale | ASTM D785 | 118 | |
| M-Sale | ASTM D785 | 73 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.