Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTMD792 | 1.29 | g/cm³ |
| Melt mass flow rate | 365°C/5.0kg | ASTMD1238 | 12到17 | g/10min |
| Shrinkage rate | MD：3.18mm | ASTMD955 | 0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.37 | % |
| Water absorption rate | 平衡 | ASTMD570 | 1.1 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | 3.18mm | ASTMD638 | 2340 | Mpa |
| tensile strength | 3.18mm | ASTMD638 | 69.6 | Mpa |
| elongation | 屈服,3.18mm | ASTMD638 | 7.2 | % |
| elongation | 断裂,3.18mm | ASTMD638 | 60到120 | % |
| Bending modulus | 3.18mm | ASTMD790 | 2410 | Mpa |
| bending strength | 5.0%应变,3.18mm | ASTMD790 | 91.0 | Mpa |
| Impact strength of cantilever beam gap | 3.18mm | ASTMD256 | 690 | J/m |
| Tensile impact strength | 3.18mm | ASTMD1822 | 399 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火,3.18mm | ASTMD648 | 207 | °C |
| Glass transition temperature | | ASTME1356 | 220 | °C |
| Linear coefficient of thermal expansion | MD：3.18mm | ASTMD696 | 5.6E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume resistivity | | ASTMD257 | 9E+15 | ohms·cm |
| Dielectric strength | 0.0254mm | ASTMD149 | >200 | KV/mm |
| Dielectric strength | 3.18mm | ASTMD149 | 15 | KV/mm |
| Dielectric constant | 3.18mm,60Hz | ASTMD150 | 3.44 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Refractive index | | ASTMD542 | 1.672 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.76mm | UL94 | V-0 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| Steam disinfection - containing morpholine | | | >1000 | cycles |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices