PC S-3000R BK9010 MITSUBISHI THAILAND

Form：Granules

Properties:

high strengthWeather resistanceUV resistanceLow viscosityGood processabilityHigh liquidityModerate heat resistanceGood resilienceFlame retardant performan

Typical Applications:

Automotive sectorElectrical appliances

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electrical appliances
Properties:	high strength \| Weather resistance \| UV resistance \| Low viscosity \| Good processability \| High liquidity \| Moderate heat resistance \| Good resilience \| Flame retardant performan

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
transmissivity	Total,3000μm	ASTM D1003	85.0	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ASTM D785	123
tensile strength	3.20mm	ASTM D638	63.0	Mpa
elongation	Break，3.20mm	ASTM D638	110	%
Bending modulus	6.40mm	ASTM D790	2350	Mpa
bending strength	6.40mm	ASTM D790	88.0	Mpa
Impact strength of cantilever beam gap	3.20mm	ASTM D256	830	J/m
Dart impact	3.20mm	ASTM D3029	>85.0	J
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTM D648	152	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	137	°C
Linear coefficient of thermal expansion		ASTM D696	0.000060-0.000070	cm/cm/℃
UL flame retardant rating	1.60mm	UL 94	V-2
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300℃/1.2kg	ASTM D1238	18	g/10min
Shrinkage rate	MD：3.00mm	ASTM D955	0.40-0.80	%
Water absorption rate	24hr	ASTM D570	0.24	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	2.1E+16	ohm·cm
Dielectric constant		ASTM D150	2.85

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top