PP EP500N BASELL THAILAND

Form：Granules | Grade：Injection grade

Properties:

Easy to processHigh rigidityHigh mobilityGood impact resistanceGood processingGood stiffness

Typical Applications:

containerPlastic boxBarrelElectrical appliancesHousehold goods

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	container \| Plastic box \| Barrel \| Electrical appliances \| Household goods
Properties:	Easy to process \| High rigidity \| High mobility \| Good impact resistance \| Good processing \| Good stiffness

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D1505	0.9	g/cm³
melt mass-flow rate	230°C/2.16 kg	ASTM D1238	12	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	26.5	Mpa
Elongation at Break	Yield	ASTM D638	6	%
Bending modulus		ASTM D790	1130	Mpa
Impact strength of cantilever beam gap	-20℃	ASTM D256	49
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ASTM D256	98.1
Shore hardness	R-Scale	ASTM D785	95

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top