Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.05to1.93 g/cm³ |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Thermosetting mixed viscosity | | ASTM D2393 | 326to620 cP |
| Post curing time | | | 3.9to4.0 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTM D2583 | 39to51 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 2990to3890 MPa |
| tensile strength | | ASTM D638 | 47.4to88.0 MPa |
| tensile strength | | ASTM D638 | 69.4to83.9 MPa |
| elongation | | ASTM D638 | 2.3to4.0 % |
| Flexural modulus | | ASTM D790 | 2840to4250 MPa |
| bending strength | | ASTM D790 | 110to141 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 4.1E+13到5.5E+14 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 74.9to143 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare