Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| MediumDensity | | | 0.900 | g/cm³ |
| SpecificHeatCapacity of Melt | | | 2750 | J/kg/°C |
| ThermalConductivityofMelt | | | 0.18 | W/m/K |
| Shrinkage rate | MD：3.20mm | | 1.1 | % |
| Shrinkage rate | TD：3.20mm | | 1.1 | % |
| Shrinkage rate | TD | ISO294-4 | 1.4 | % |
| Shrinkage rate | MD | ISO294-4 | 1.3 | % |
| Water absorption rate | 饱和,23°C,2.00mm | ISO62 | 3.0 | % |
| Water absorption rate | 平衡,23°C,2.00mm,50%RH | ISO62 | 1.3 | % |
| Stickiness number | 96%H2SO4 | ISO307 | 95.0 | cm³/g |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ISO527-2 | 2400 | Mpa |
| tensile strength | 屈服 | ISO527-2 | 62.0 | Mpa |
| elongation | 屈服 | ISO527-2 | 4.5 | % |
| Nominal tensile fracture strain | | ISO527-2 | 17 | % |
| Bending modulus | | ISO178 | 2100 | Mpa |
| Impact strength of simply supported beam without notch | -30°C | ISO179/1eU | NoBreak | |
| Impact strength of simply supported beam without notch | 23°C | ISO179/1eU | NoBreak | |
| Rockwell hardness | R级 | ISO2039-2 | 114 | |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Linear coefficient of thermal expansion | TD：55to160°C | ISO11359-2 | 1.8E-04 | cm/cm/°C |
| Hot deformation temperature | 0.45MPa,未退火 | ISO75-2/B | 135 | °C |
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/A | 62.0 | °C |
| Glass transition temperature | | ISO11357-2 | 65.0 | °C |
| vicat softening point | | ISO306/B50 | 181 | °C |
| Melting temperature | | ISO11357-3 | 218 | °C |
| Linear coefficient of thermal expansion | MD：-- | ISO11359-2 | 1.1E-04 | cm/cm/°C |
| Linear coefficient of thermal expansion | MD：-40to23°C | ISO11359-2 | 9E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | MD：55to160°C | ISO11359-2 | 1.6E-04 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD：-- | ISO11359-2 | 1.2E-04 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD：-40to23°C | ISO11359-2 | 9E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | IEC60093 | -- | ohms |
| Volume resistivity | | IEC60093 | 1E+15 | ohms·cm |
| Dielectric strength | | IEC60243-1 | 30 | KV/mm |
| Relative permittivity | 100Hz | IEC60250 | 3.60 | |
| Relative permittivity | 1MHz | IEC60250 | 3.20 | |
| Dissipation factor | 100Hz | IEC60250 | 0.014 | |
| Dissipation factor | 1MHz | IEC60250 | 0.016 | |
| Leakage Trace Index | | IEC60112 | 600 | V |
| film | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strain MD | Yield | ISO527-3 | 4.5 | % |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.9mm | UL94 | V-2 | |
| UL flame retardant rating | 1.5mm | UL94 | V-2 | |
| UL flame retardant rating | 0.9mm | IEC60695-11-10,-20 | V-2 | |
| UL flame retardant rating | 1.5mm | IEC60695-11-10,-20 | V-2 | |
| Extreme Oxygen Index | | ISO4589-2 | 27 | % |
| FMVSS flammability | | FMVSS302 | DNI | |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| EmissionofOrganicCompounds | | VDA277 | 3.10 | µgC/g |
| Odor | | VDA270 | 4.50 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices