PP EPS30R
0
- Properties:Has good impact resistance and block copolymerization
- Usages:Can be widely used in various injection molded products
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | GB/T 3682 | 2 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Izod notched impact strength | GB/T 1843 | ≥369 j/m | |
| GB/T 1843 | ≥61 j/m | ||
| tensile strength | GB/T 1040 | ≥24 MPa | |
| Flexural modulus | GB/T 9341 | ≥94.3 MPa |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Granular ash content | GB/T 9345 | ≤0.014 % | |
| yellow index | GB/T 3862 | ≤-2.8 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top