
PBT 736-BK1066 SABIC INNOVATIVE US
61
Form:Granules | Grade:Enhanced level
Properties:
High rigidityGlass fiber reinforcedMineral fiber/glass fiber
Typical Applications:
Electrical applicationsAutomotive Applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical applications | Automotive Applications |
| Properties: | High rigidity | Glass fiber reinforced | Mineral fiber/glass fiber |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Long term use temperature | 电气 | 130 | °C | |
| 含冲击 | 130 | °C | ||
| 无冲击 | 140 | °C | ||
| Rockwell hardness | 116 | |||
| Impact strength of cantilever beam gap | 23℃ | 75 | J/m | |
| tensile strength | Break | 110 | Mpa | |
| Bending modulus | 8967 | Mpa | ||
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | 2.3E-05 | 1/℃ | ||
| Hot deformation temperature | HDT | 215 | °C | |
| UL flame retardant rating | HB | |||
| 1.6 | mm | |||
| Hot deformation temperature | HDT | 204 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| enhance | 45 | % | ||
| Shrinkage rate | 3-4 | E-3 | ||
| Water absorption rate | 0.07 | % | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | 5E+15 | ohm-cm | ||
| Dissipation factor | 0.01 | |||
| Dielectric constant | 3.8 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.