TPEE BT-1030D LG CHEM KOREA

Form：Granules | Grade：Injection grade

Properties:

Low temperature resistancGood flexibilitywear resistantChemical resistance

Typical Applications:

packingEngine partsLaptop caseElectrical componentsSoft handleAutomotive interior parts

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	packing \| Engine parts \| Laptop case \| Electrical components \| Soft handle \| Automotive interior parts
Properties:	Low temperature resistanc \| Good flexibility \| wear resistant \| Chemical resistance

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.2mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
elongation	Break,23°C,2.00mm,Injection	ASTM D638	850	%
tensile strength	Break,23°C,2.00mm,Injection	ASTM D638	21.6	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ASTM D3418	165	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ASTM D570	0.80	%
Shrinkage rate	MD：3.20mm,InjectionMolded	ASTM D955	0.40-0.80	%
melt mass-flow rate	230°C/2.16kg	ASTM D1238	25	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 0
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD,23°C,Injection	ASTM D2240	28
Shore hardness	Shore hardness	ShoreA,23°C,Injection	ASTM D2240	80

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top