PET GF15 X BK
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.55 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.43 g/cm3 | |
| Water absorption rate | ASTM D-570 | 0.2 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D-790 | 96.5 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 74.7 J/m | |
| Rockwell hardness | ASTM D-785 | 110 | |
| tensile strength | ASTM D-638 | 115 MPa | |
| elongation at break | ASTM D-638 | 6 % | |
| Flexural modulus | ASTM D-790 | 5340 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+14 ohm·cm | |
| dielectric strength | ASTM D-149 | 19 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 207 ℃ | |
| melting temperature | 232 ℃ | ||
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000092 cm/cm/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top