TPE CE 3620 NA SUZHOU GLS

Form：Granules | Grade：Injection grade

Properties:

High mobilityColoring

Typical Applications:

Phone caseElectrical enclosureThin walled componentsConsumer product application fieldCommunication ApplicationsSoft handleElectrical/Electronic ApplicationsWrapping moldingElectrical appliancesSoft touch applicationThick wall accessories (components)Computer components

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Phone case \| Electrical enclosure \| Thin walled components \| Consumer product application field \| Communication Applications \| Soft handle \| Electrical/Electronic Applications \| Wrapping molding \| Electrical appliances \| Soft touch application \| Thick wall accessories (components) \| Computer components
Properties:	High mobility \| Coloring

Certificates

No Data...

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Apparent viscosity	200°C	ASTM D3835	19.4	Pa·s
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5130mm	UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	100%Strain	ASTM D412	3.05	Mpa
	tensile strength	300%Strain	ASTM D412	4.26	Mpa
	tensile strength	tensile strength	Break	ASTM D412	7.03	Mpa
elongation	Break	ASTM D412	630	%
tear strength		ASTM D624	40.6	kN/m
Permanent compression deformation	23°C,22hr	ASTM D395	18	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ASTM D1238	2.0to15	g/10min
melt mass-flow rate	melt mass-flow rate	200°C/5.0kg	ASTM D1238	25to35	g/10min
Shrinkage rate	MD	ASTM D955	1.1-1.7	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,10Sec	ASTM D2240	65
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Common material types			苯乙烯类热塑性弹性体(TES

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top