Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.27 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.25 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 109 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 3590 MPa |
| tensile strength | Break | ASTMD638 | 110 MPa |
| elongation | Break | ASTMD638 | 50 % |
| Flexural modulus | | ASTMD790 | 3520 MPa |
| bending strength | Yield | ASTMD790 | 165 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 53 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+17 ohms·cm |
| dielectric strength | | ASTMD149 | 830 kV/mm |
| Dissipation Factor | | ASTMD150 | 1.2E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 201 °C |
| thermal conductivity | | ASTMC177 | 0.032 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare