Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO62 | 5.5 % |
| Water absorption rate | | ISO62 | 1.2 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 725 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 725 °C |
| burning rate | | FMVSS302 | 0.0 mm/min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 65 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 68 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1A/1 | 7900 Mpa |
| Tensile stress | | ISO527-2/1A/5 | 120 Mpa |
| Tensile strain | | ISO527-2/1A/5 | 3.3 % |
| Bending modulus 2 | | ISO178 | 6900 Mpa |
| Bending stress 2 | | ISO178 | 185 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+12 ohms |
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| CTI | | IEC60112 | 500 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/Af | 230 °C |
| vicat | | ISO306/B50 | 240 °C |
| Melting temperature 5 | | ISO11357 | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices