
PBT 1101G-X54 TG060B TORAY SHENZHEN
104
Form:Granules
Properties:
Glass fiber reinforcedFlame retardantHigh impact resistance
Typical Applications:
Automotive sectorElectronic fieldElectrical field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Electronic field | Electrical field |
| Properties: | Glass fiber reinforced | Flame retardant | High impact resistance |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Water absorption rate | 23℃·24hr | ASTM D-570 | 0.07 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | Notched,23℃,1/8时宽 | ASTM D-256 | 16 | kg·cm/cm |
| Unnotched,23℃,1/8时宽 | ASTM D-256 | 60 | kg·cm/cm | |
| Bending modulus | 23℃ | ASTM D-790 | 72 | kg/cm |
| Rockwell hardness | 23℃ | ASTM D-785 | 89 | M标度 |
| Elongation at Break | 23℃ | ASTM D-638 | 5 | % |
| tensile strength | 23℃ | ASTM D-638 | 1200 | kg/cm |
| bending strength | 23℃ | ASTM D-790 | 1700 | kg/cm |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ASTM D-696 | 2.5 | cm/cm℃×10 | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 80×80×3板材 | 0.4-1.0 | % | |
| Hot deformation temperature | 4.6kg/cm | ASTM D-648 | 220 | °C |
| 18.6kg.cm | ASTM D-648 | 210 | °C | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D-257 | 7.5(2.2) | cm×10 | |
| Arc resistance | ASTM D-495 | 131 | 秒 | |
| Dielectric strength | 短时·23℃·1/8时 | ASTM D-149 | 27(18) | KV/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.