PBT 5810G40 MITSUBISHI ENGINEERING JAPAN

Form：Granules | Grade：Enhanced level

Properties:

Glass fiber reinforcedFlame retardant

Typical Applications:

Vehicle electronicsFitness equipmentBottle cap

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Vehicle electronics \| Fitness equipment \| Bottle cap
Properties:	Glass fiber reinforced \| Flame retardant

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
purpose			低翘曲.30%玻纤增强
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ASTM D638/ISO 527	12000	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	10500	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	195	kg/cm²(MPa)[Lb/in²]
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648/ISO 75	190	℃（℉）
Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	215	℃（℉）
Melting temperature			224	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.53
Shrinkage rate		ASTM D955	0.1	%
melt mass-flow rate		ASTM D1238/ISO 1133	9	g/10min
melt mass-flow rate	melt mass-flow rate		ASTM D1238/ISO 1133	6	g/10min
Water absorption rate		ASTM D570/ISO 62	0.08	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257/IEC 60093	1.E+15	Ω
Volume resistivity		ASTM D257/IEC 60093	1.E+14	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top