Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.51 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.16 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 114 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Limiting Oxygen Index | | ASTMD2863 | 50 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 8960 MPa |
| tensile strength | Yield | ASTMD638 | 169 MPa |
| bending strength | Yield | ASTMD790 | 228 MPa |
| Compression Modulus | | ASTMD695 | 6470 MPa |
| compressive strength | | ASTMD695 | 212 MPa |
| tensile strength | Break | ASTMD638 | 159 MPa |
| elongation | Break | ASTMD638 | 3.0 % |
| Flexural modulus | | ASTMD790 | 8960 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 110 J/m |
| Suspended wall beam without notch impact strength | | ASTMD256 | 430 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 30 kV/mm |
| dielectric constant | | ASTMD150 | 3.70 |
| Dissipation Factor | | ASTMD150 | 1.5E-03 |
| Volume resistivity | | ASTMD257 | 3E+16 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 212 °C |
| | ASTMD648 | 210 °C |
| | ASTMD696 | 2E-05 cm/cm/°C |
| thermal conductivity | | ASTMC177 | 0.26 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare