
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Relative temperature of heating wire | 3.00mm | IEC 60695-2-13 | 750 | °C |
| 1.50mm | IEC 60695-2-13 | 750 | °C | |
| Ignition temperature of heating wire | 3.00mm | IEC 60695-2-12 | 725 | °C |
| 1.50mm | IEC 60695-2-12 | 725 | °C | |
| UL flame retardant rating | UL -94 | HB | 3.20mm | |
| UL -94 | HB | 1.60mm | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 30 | kJ/m² |
| 23°C | ISO 179/1eU | 50 | kJ/m² | |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 3.5 | kJ/m² |
| 23°C | ISO 179/1eA | 5.0 | kJ/m² | |
| Bending modulus | 23°C | ISO 178 | 3300 | Mpa |
| bending strength | 23°C | ISO 178 | 83 | Mpa |
| Tensile modulus | 23°C | ISO 527-2 | 3400 | Mpa |
| Elongation at Break | 23°C | ISO 527-2 | 6.00 | % |
| tensile strength | 23°C | ISO 527-2 | 50 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 175 | °C |
| Vicat softening temperature | ISO 306/B50 | 184 | °C | |
| ISO 306/A50 | 218 | °C | ||
| Hot deformation temperature | 1.80MPaAnnealed | ISO 75-2/Af | 94 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 250℃/2.16Kg | ISO 1133 | 15.0 | cm3/10min |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | ISO 2039-1 | 113 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.