PA6 TYLON® 235
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 1.0to1.4 % | |
| Water absorption rate | ASTM D570 | 1.6 % | |
| density | ASTM D792 | 1.13 g/cm³ | |
| ASTM D792 | 1.13 g/cm3 | ||
| Shrinkage rate | ASTM D955 | 1.0-1.4 % | |
| Water absorption rate | ASTM D570 | 1.6 % | |
| Rockwell hardness | R-Scale | ASTM D785 | 115 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 115 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 2760 MPa | |
| bending strength | ASTM D790 | 110 MPa | |
| tensile strength | ASTM D638 | 75.8 MPa | |
| elongation | Break | ASTM D638 | 80 % |
| tensile strength | ASTM D638 | 75.8 MPa | |
| elongation | Break | ASTM D638 | 80 % |
| Flexural modulus | ASTM D790 | 2760 MPa | |
| bending strength | ASTM D790 | 110 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 59 J/m |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 59 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 177 °C | |
| ASTM D648 | 60.0 °C | ||
| ASTM D648 | 177 ℃ | ||
| ASTM D648 | 60.0 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top