PP Bamtac BPP035A
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.05到1.07 g/cm³ | |
| melt mass-flow rate | ISO1133 | 9.0到13 g/10min | |
| Contractility | 0.30到0.70 % | ||
| density | ISO1183 | 1.05到1.07 g/cm³ | |
| melt mass-flow rate | ISO1133 | 9.0到13 g/10min | |
| Contractility | 0.30到0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 70到75 | |||
| 70到75 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2 | >3500 MPa | |
| Tensile stress | ISO527-2 | >25.0 MPa | |
| Tensile strain | Break | ISO527-2 | >2.0 % |
| Flexural modulus | ISO178 | >2500 MPa | |
| Bending stress | ISO178 | >50.0 MPa | |
| ISO178 | >50.0 MPa | ||
| Tensile modulus | ISO527-2 | >3500 MPa | |
| Tensile stress | ISO527-2 | >25.0 MPa | |
| Tensile strain | Break | ISO527-2 | >2.0 % |
| Flexural modulus | ISO178 | >2500 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180 | >4.0 kJ/m² | |
| ISO180 | >4.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/A | 105 °C | ||
| ISO75-2/A | 105 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top