Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.36 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.25到0.50 % |
| Water absorption rate | | ASTMD570 | 0.18 % |
| water content | | | 0.020 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-2 |
| UL flame retardant rating | | UL94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Primary Additive | | | 20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 5520 MPa |
| tensile strength | | ASTMD638 | 96.5 MPa |
| elongation | Yield | ASTMD638 | 3.0到5.0 % |
| Flexural modulus | | ASTMD790 | 4830 MPa |
| bending strength | | ASTMD790 | 152 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 80 J/m |
| Suspended wall beam without notch impact strength | | ASTMD4812 | 640 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 163 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare