Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO62 | 0.20 % |
| density | | ISO1183 | 1.49 g/cm³ |
| melt mass-flow rate | | ISO1133 | 5.0到10 g/10min |
| Shrinkage rate | | ISO294-4,ISO2577 | 0.45 % |
| Shrinkage rate | | ISO294-4,ISO2577 | 0.30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 9400 MPa |
| Tensile stress | | ISO527-2 | 120 MPa |
| Tensile strain | Yield | ISO527-2 | 1.7 % |
| Flexural modulus | | ISO178 | 7900 MPa |
| Bending stress | | ISO178 | 135 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/A | 7.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | IEC60250 | 3.70 |
| Dissipation Factor | | IEC60250 | 1E-03 |
| Dissipation Factor | | IEC60250 | 6E-03 |
| CTI | | IEC60112 | 125 V |
| Surface Resistivity | | IEC60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC60093 | >1.0E+15 ohms·cm |
| dielectric strength | | IEC60243-1 | 45 kV/mm |
| dielectric constant | | IEC60250 | 3.70 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO75-2/A | 184 °C |
| Glass Transition Temperature | | ISO11357-2,DSC | 185 °C |
| | ISO11359-2 | 2.6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare