ASA+PC ASA/PC 220 H UV
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Water absorption rate | ISO62 | 0.20 % | |
| Tensile modulus | ISO527-2/1 | 2200 MPa | |
| Tensile stress | ISO527-2/50 | 57.0 MPa | |
| Tensile strain | ISO527-2/50 | 4.4 % | |
| Nominal tensile fracture strain | ISO527-2/50 | >50 % | |
| Charpy Notched Impact Strength | ISO179/1eA | 15 kJ/m² | |
| ISO179/1eA | 50 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO179/1eU | 无断裂 | |
| Volume resistivity | IEC60093 | 1E+14 ohms·cm | |
| UL flame retardant rating | UL94 | HB | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 无断裂 | |
| Heat distortion temperature | ISO75-2/B | 123 °C | |
| ISO75-2/A | 102 °C | ||
| vicat | ISO306/B50 | 120 °C | |
| DIN53752 | 8E-05 cm/cm/°C | ||
| DIN53752 | 8.5E-05 cm/cm/°C | ||
| Surface Resistivity | IEC60093 | 1E+16 ohms | |
| density | ISO1183 | 1.10 g/cm³ | |
| Melt volume flow rate | ISO1133 | 50.0 cm³/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top