PPO HM4025H-75001 SABIC INNOVATIVE NANSHA

Form：Granules | Grade：Injection grade

Properties:

Dimensional stabilityHigh rigidityLow water absorptionLow warpage

Typical Applications:

Printer chassisElectronic consumer productsElectronic components

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Printer chassis \| Electronic consumer products \| Electronic components
Properties:	Dimensional stability \| High rigidity \| Low water absorption \| Low warpage

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-1
	UL flame retardant rating	3.0mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	2.5mm	UL 94	5VA
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Poisson's ratio		ASTM D638	0.38
Friction coefficient	Steel - Static	ASTM D1894	0.42
Friction coefficient	Friction coefficient	Itself - Static	ASTM D1894	0.44
Taber abraser	1000Cycles,1000g,CS-17Wheel	ASTM D1044	35.0	mg
tensile strength	Break	ASTM D638	127	Mpa
elongation	Yield	ASTM D638	1.5	%
Bending modulus	100mmSpan	ASTM D790	9650	Mpa
bending strength	Yield,100mmSpan	ASTM D790	159	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI		UL 746	50.0	°C
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	124	°C
Linear coefficient of thermal expansion	MD:-40to95°C	ASTME831	2.2E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD:-40to95°C	ASTME831	3.2E-05	cm/cm/°C
RTI Elec		UL 746	50.0	°C
RTI Imp		UL 746	50.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD:3.20mm	Internal Method	0.15	%
Shrinkage rate	Shrinkage rate	TD:3.20mm	Internal Method	0.25	%
Water absorption rate	24hr	ASTM D570	0.060	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	1E+17	ohms
Volume resistivity		ASTM D257	1E+17	ohms·cm
Dielectric strength	1.60mm,inAir	ASTM D149	25	KV/mm
Arc resistance		ASTM D495	PLC 5
Compared to the anti leakage trace index	CTI	UL 746	PLC 4
High arc combustion index	HAI	UL 746	PLC 4
High voltage arc tracing rate	HVTR	UL 746	PLC 4
Hot wire ignition	HWI	UL 746	PLC 0
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ASTM D785	90

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top