PP Homopolymer Teldene® B20ML
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 0.905 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 21 g/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180 | 6.5 kJ/m² | |
| Charpy Notched Impact Strength | ISO179/1e | 4.0 kJ/m² | |
| ISO179/1e | 5.2 kJ/m² | ||
| ISO179/1e | 7.4 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO179/1eU | 100 kJ/m² | |
| ISO179/1eU | 130 kJ/m² | ||
| ISO179/1eU | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO178 | 1600 MPa | |
| Tensile modulus | ISO527-2/1 | 1550 MPa | |
| Tensile stress | Yield | ISO527-2/50 | 28.0 MPa |
| Tensile strain | Yield | ISO527-2/50 | 5.0 % |
| Break | ISO527-2/50 | >50 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 111 °C | ||
| vicat | ISO306/A50 | 150 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top