Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage force of mold | | ASTM D955 | 6-9 10 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| relative density | | ISO 1183 | 1.21 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527 | 44 Mpa |
| elongation | Break | ISO 527 | 20 % |
| bending strength | | ISO 178 | 78 Mpa |
| Flexural modulus | | ISO 178 | 2300 Mpa |
| Notch impact strength | | ISO 179 | 25 KJ/M |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| flame resistance | | | UL 94 V-0 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 24 KV/mm |
| dielectric constant | | ASTM D150 | 2.9 10 |
| Volume resistivity | | ASTM D257 | 10 Ω.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 75 | 100 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare