PLA EcoVid 80TFH
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.27 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 6.0 g/10min | |
| ASTMD1238 | 6.0 g/10min | ||
| ASTMD1238 | 0.30到0.50 % | ||
| ASTMD1238 | 2.5 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Clarity | NIL |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTMD790 | 108 MPa | |
| tensile strength | Yield | ASTMD638 | 62.1 MPa |
| elongation | Break | ASTMD638 | 3.5 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 16 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | ASTMD3418 | 55.0到60.0 °C | |
| vicat | ASTMD1525 | 130 °C | |
| melting temperature | ASTMD3418 | 130到180 °C | |
| Crystallization peak temperature | ASTMD3418 | 155到170 °C | |
| Heat distortion temperature | ASTME2092 | 80到110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top