GPPS SP880
0
- Properties:High impact resistancegood machinabilityand good surface finish
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.05 g/cm3 | |
| melt mass-flow rate | ASTM D-1238 | 6.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D-785 | 60 L Scale | |
| tensile strength | ASTM D-638 | 30.4 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 96.1 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 75.0 ℃ | |
| vicat | ASTM D-1525 | 97.2 ℃ | |
| Linear expansion coefficient | Flow | ASTM D-696 | 0.000080 cm/cm/℃ |
| UL flame retardant rating | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top