PP ECP 115
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.04 g/cm³ | ||
| melt mass-flow rate | 10 g/10min | ||
| 1.0 g/10min | |||
| density | 1.04 g/cm³ | ||
| melt mass-flow rate | 10 g/10min | ||
| 1.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | 1200 MPa | ||
| Bending stress | 29.0 MPa | ||
| Tensile modulus | 1300 MPa | ||
| Tensile stress | 20.0 MPa | ||
| Flexural modulus | 1200 MPa | ||
| Bending stress | 29.0 MPa | ||
| Tensile modulus | 1300 MPa | ||
| Tensile stress | 20.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 kJ/m² | ||
| Impact strength of simply supported beam without notch | 无断裂 | ||
| Charpy Notched Impact Strength | 5.0 kJ/m² | ||
| Impact strength of simply supported beam without notch | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | 1E+04 ohms | ||
| 1E+04 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 69.0 °C | ||
| 46.0 °C | |||
| 69.0 °C | |||
| 46.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top