
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| water content | QB/44072LW010-91 | ≤0.05 | % | |
| Monomer content | QB/44072JW010-91 | ≤0.5 | % | |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Relative viscosity | GB T1632-93 | 2.50 | ||
| density | GB 1033-86 | 1.14 | g/cm³ | |
| melt mass-flow rate | ASTM D-1238 | 26.4 | g/10min | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ASTM D-785 | 15.2 | Kgf/mm2 | |
| tensile strength | ASTM D-638 | 73.3 | Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 10.2 | kJ/m² | |
| Tensile modulus | ASTM D-638 | 2528.5 | Mpa | |
| bending strength | ASTM D-790 | 113.1 | Mpa | |
| Bending modulus | ASTM D-790 | 2203.9 | Mpa | |
| elongation | Break | ASTM D-638 | 32.5 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | V-2 | ||
| Hot deformation temperature | 1.82MPa | ASTM D-648 | 53 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 1.3 | % | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric loss | Tangent | ASTM D-150 | 0.028 | MHz |
| Dielectric constant | ASTM D-150 | 3.3 | MHz |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.