PC Hylex® P2310L ENTEC USA
0
- Usages:currency
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.20 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 10 g/10min | |
| Shrinkage rate | ISO 294-4 | 0.50to0.70 % | |
| Water absorption rate | ASTM D570 | 0.15 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 80 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2280 MPa | |
| bending strength | ISO 178 | 83.0 MPa | |
| tensile strength | Break | ISO 527-2 | 61.0 MPa |
| Tensile strain | Break | ISO 527-2 | 110 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 54 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 129 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top