
POM K300 BK KOLON KOREA
51
Form:Granules | Grade:Injection grade
Typical Applications:
currency
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | currency |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Yield,23°C | ASTM D638 | 64.0 | Mpa |
| elongation | Yield,23°C | ASTM D638 | 50 | % |
| Bending modulus | 23°C | ASTM D790 | 2500 | Mpa |
| bending strength | 23°C | ASTM D790 | 93.0 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.3E-04 | cm/cm/°C |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 158 | °C |
| 1.8MPa,Unannealed | ASTM D648 | 110 | °C | |
| Vicat softening temperature | ASTM D1525 | 162 | °C | |
| Melting temperature | 166 | °C | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 10 | g/10min |
| Shrinkage rate | MD | ASTM D955 | 2.0 | % |
| Water absorption rate | Equilibrium,23°C,60%RH | ASTM D570 | 0.22 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D257 | 1E+16 | ohms | |
| Volume resistivity | ASTM D257 | 1E+14 | ohms·cm | |
| Dielectric strength | ASTM D149 | 19 | KV/mm | |
| Dielectric constant | ASTM D150 | 3.70 | ||
| Dissipation factor | 1MHz | ASTM D150 | 6E-03 | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Scale | ASTM D785 | 80 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.