ABS LNH801 LANXESS GERMANY

Form：Granules | Grade：Injection grade

Properties:

enhanceThermal stabilityGood flowHigh heat resistance

Typical Applications:

CastersAutomotive components

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Casters \| Automotive components
Properties:	enhance \| Thermal stability \| Good flow \| High heat resistance

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.07
Melt Volume Flow Rate (MVR)	220℃,10kg	ISO 1133	9.00	CM
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-1	2400	Mpa
Tensile stress	Yield	ISO 527-1	49.0	Mpa
Tensile strain	Yield	ISO 527-1	3.0	%
Fracture strain	23℃	ISO 527-1	>15	%
Bending modulus	23℃	ISO 178	2300	Mpa
bending strength	23℃	ISO 178	77.0	Mpa
Charpy Notched Impact Strength	23℃	ISO 179/1eA	30.0	KJ/m
	Charpy Notched Impact Strength	-30℃	ISO 179/1eA	12.0	KJ/m
		Charpy Notched Impact Strength	23℃	ISO 179/1eU	220	KJ/m
		Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30℃	ISO 179/1eU	160	KJ/m
Impact strength of cantilever beam gap	-30℃	ISO 180/1A	12.0	KJ/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ISO 180/1A	30.0	KJ/m
Shore hardness		ISO 2039-1	105	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa	ISO 75-1	106	°C
Hot deformation temperature	Hot deformation temperature	1.80MPa	ISO 75-1	99.0	°C
Vicat softening temperature	50℃/h 50N	ISO 306	105	°C
Linear coefficient of thermal expansion	parallel	ISO 11359-1	0.000080	cm/cm℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ISO 294-4	0.50-0.70	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		IEC 60243-1	38	KV/mm
Surface resistivity		IEC 60093	1E+16	ohms
Volume resistivity		IEC 60093	1E+14	ohm.m
Relative permittivity	100Hz	IEC 60250	3.10
Relative permittivity	Relative permittivity	1000Hz	IEC 60250	3.00
Dielectric loss	100Hz	IEC 60250	0.0050
Dielectric loss	Dielectric loss	1000Hz	IEC 60250	0.0090

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top