POM N2320 003 BK120 BASF GERMANY

Form：Granules

Properties:

High impact resistanceenhance

Typical Applications:

Automotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications
Properties:	High impact resistance \| enhance

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2	2810	Mpa
tensile strength	Yield,23°C	ISO 527-2	62.0	Mpa
Tensile strain	Yield,23°C	ISO 527-2	10	%
Nominal tensile fracture strain	23°C	ISO 527-2	25	%
Bending modulus	23°C	ISO 178	2340	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	151	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	96.0	°C
Melting temperature		ISO 3146	167	°C
RTI Elec	1.5mm	UL 746	105	°C
RTI Elec	RTI Elec	3.0mm	UL 746	105	°C
RTI Imp	1.5mm	UL 746	90.0	°C
RTI Imp	RTI Imp	3.0mm	UL 746	90.0	°C
RTI Str	1.5mm	UL 746	90.0	°C
RTI Str	RTI Str	3.0mm	UL 746	105	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Saturation,23°C	ISO 62	0.80	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+13	ohms
Volume resistivity		IEC 60093	1E+15	ohms·cm
Dielectric strength		IEC 60243-1	40	KV/mm
Dielectric constant	100Hz	IEC 60250	3.80
Dielectric constant	Dielectric constant	1MHz	IEC 60250	3.80
Dissipation factor	100Hz	IEC 60250	1E-03
Dissipation factor	Dissipation factor	1MHz	IEC 60250	5E-03
Compared to the anti leakage trace index		IEC 60112	PLC 0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top