PPSU Ceramer 20
0
- Usages:composite
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.44 g/cm³ | ||
| Crystallinity | 60 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO178 | 3850 MPa | |
| ISO178 | 3410 MPa | ||
| ISO178 | 3030 MPa | ||
| ISO178 | 1740 MPa | ||
| Bending stress | ISO178 | 87.0 MPa | |
| ISO178 | 84.0 MPa | ||
| ISO178 | 65.0 MPa | ||
| ISO178 | 47.0 MPa | ||
| ISO178 | 43.0 MPa | ||
| Tensile strain | ISO178 | 2.1 % | |
| ISO178 | 2.1 % | ||
| ISO178 | 1.9 % | ||
| ISO178 | 1.6 % | ||
| ISO178 | 2.8 % | ||
| Flexural modulus | ISO178 | 3960 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTMD150 | 3.50 | |
| ASTMD150 | 3.50 | ||
| ASTMD150 | 3.41 | ||
| ASTMD150 | 3.39 | ||
| ASTMD150 | 3.37 | ||
| ASTMD150 | 3.37 | ||
| ASTMD150 | 3.28 | ||
| Dissipation Factor | ASTMD150 | 2E-03 | |
| ASTMD150 | 5.2E-03 | ||
| ASTMD150 | 5.4E-03 | ||
| ASTMD150 | 5.8E-03 | ||
| ASTMD150 | 9.5E-03 | ||
| dielectric strength | ASTMD149 | 12 kV/mm | |
| dielectric constant | ASTMD150 | 3.60 | |
| Dissipation Factor | ASTMD150 | 4E-03 | |
| ASTMD150 | 5.9E-03 | ||
| Surface Resistivity | ASTMD257 | 1E+11 ohms | |
| Volume resistivity | ASTMD257 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/A | >295 °C | ||
| ISO75-2/C | 250 °C | ||
| 360 °C | |||
| 4.9E-05 cm/cm/°C | |||
| 2.6E-05 cm/cm/°C | |||
| 2.5E-05 cm/cm/°C | |||
| 2.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top