ABS ST-100 NIPPON A&L

Form：Granules | Grade：Transparent level

Properties:

transparentFood contact compliance

Typical Applications:

Special material for bottle capsHelmet

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Special material for bottle caps \| Helmet
Properties:	transparent \| Food contact compliance

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Refractive index	2mmt	ASTM D-1003	2.5	%
Transmittance rate	2mmt	ASTM D-1003	92	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density	23℃	ASTM D-791	1.10	23℃
melt mass-flow rate	220℃,10kg	ASTM D-1238	20	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	23℃	ASTM D-785	110	R scale
Impact strength of cantilever beam gap	23℃,6.4mmt	ASTM D-256	147(15)	J/m(kg.cm/cm)
bending strength	23℃	ASTM D-790	59(600)	MPa(KG/cm
Bending modulus	23℃	ASTM D-790	1960(20000)	MPa(KG/cm
Elongation at Break	23℃	ASTM D-638	50	%
tensile strength	23℃，Yield	ASTM D-638	39(400)	MPa(KG/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Mold temperature			40-70	°C
Forming temperature			200-240	°C
Pre drying temperature	干燥2hr以上		80-90	°C
Combustibility		UL 94	HB	CLASS
Linear coefficient of thermal expansion		ASTM D-696	8.0	×10
Hot deformation temperature	1.82MPa,6.4mmt	ASTM D-648	82	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top