Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.47 g/cm³ |
| Water absorption rate | Saturation | ASTM D570 | <0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 86 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Space stability, shrinkage | | | 0.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 96.5 MPa |
| bending strength | | ASTM D790 | 58.6 MPa |
| Compression Modulus | | ASTM D695 | 2810 MPa |
| compressive strength | | ASTM D695 | 142 MPa |
| compressive strength | | ASTM D695 | 203 MPa |
| tensile strength | | ASTM D638 | 70.9 MPa |
| tensile strength | | ASTM D638 | 58.5 MPa |
| elongation | Break | ASTM D638 | 5.5 % |
| elongation | | ASTM D638 | 3.7 % |
| Flexural modulus | | ASTM D790 | 3150 MPa |
| WearRate-JetEngineSimulationTesting,Bearing | | | 254.0 µm |
| WearRate-JetEngineSimulationTesting,Bearing | | | 457.2 µm |
| WearRate-JetEngineSimulationTesting,Bearing | | | 609.6 µm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTM D257 | 1.0E+10到1.0E+11 ohms |
| Volume resistivity | | ASTM D257 | 1.0E+12到1.0E+13 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ASTM D696 | 4E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare