PA66 MT409AHS NC010 DUPONT USA

Form：Granules | Grade：Injection grade

Properties:

Thermal stability

Typical Applications:

Electrical appliances

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electrical appliances
Properties:	Thermal stability

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-40°C	ISO 179/1eA	12	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	19	kJ/m²
Impact strength of cantilever beam gap	-40°C	ISO 180/1A	11	kJ/m²
	Impact strength of cantilever beam gap	-30°C	ISO 180/1A	13	kJ/m²
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	17	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning rate	1.00mm	ISO 3795	29	mm/min
UL flame retardant rating	0.8mm	UL 94	HB
	UL flame retardant rating	1.5mm	UL 94	HB
		UL flame retardant rating	0.8mm	IEC 60695-11-10,-20	HB
		UL flame retardant rating	UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	HB
FMVSS flammability		FMVSS302	B
Fogging-G-value	condensate	ISO 6452	1E-04	g
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	2400	Mpa
tensile strength	Yield	ISO 527-2	61.0	Mpa
Tensile strain	Yield	ISO 527-2	5.0	%
Nominal tensile fracture strain		ISO 527-2	25	%
Bending modulus		ISO 178	2200	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	187	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	65.0	°C
Melting temperature		ISO 11357-3	262	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	1E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.11	g/cm³
Shrinkage rate	TD	ISO 294-4	1.7	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	1.7	%
Water absorption rate	23°C,24hr	ISO 62	0.90	%
Top out temperature			190	°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	--	ohms
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Relative permittivity	100Hz	IEC 60250	3.90
Relative permittivity	Relative permittivity	1MHz	IEC 60250	3.70
Dissipation factor	100Hz	IEC 60250	6E-03
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.013
Compared to the anti leakage trace index		IEC 60112	PLC 0
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
EmissionofOrganicCompounds		VDA277	10.0	µgC/g
Odor		VDA270	4.00

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top