Biodeg Polymers Biograde WS-50
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD4883 | 1.34 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 2.6 g/10min |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| BlownFilmMeltTemperature | 170到185 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Break | ASTMD883 | 14.8 MPa |
| elongation | Break | ASTMD883 | 250 % |
| Flexural modulus | ASTMD790 | 23.3 MPa |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMF1927 | 0.350 cm³/m²/24hr |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top