PAI TORLON® 4275 LF SOLVAY USA

Usages:
Delivery application
Engine parts
Aerospace Applications
Roller
Industrial components
Washer
bearing
Metal substitution
Thrust washer
packing
Sealing device
Machine/mechanical components
Bushing
Application in the automotive field
Aircraft Applications
Industrial applications
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Water absorption rate		ASTM D570	0.33 %
Shrinkage rate		ASTM D955	0.25-0.45 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	8830 Mpa
Tensile modulus	Tensile modulus		ASTM D1708	7790 Mpa
tensile strength		ASTM D638	117 Mpa
tensile strength	tensile strength		ASTM D1708	131 Mpa
elongation		ASTM D638	2.6 %
elongation	elongation		ASTM D1708	7.0 %
Flexural modulus		ASTM D790	7310 Mpa
Flexural modulus	Flexural modulus		ASTM D790	5100 Mpa
bending strength		ASTM D790	208 Mpa
bending strength	bending strength		ASTM D790	110 Mpa
Compression Modulus		ASTM D695	4000 Mpa
compressive strength		ASTM D695	123 Mpa
coefficient of friction		ASTM D3702	0.31
	coefficient of friction		ASTM D3702	0.29
		coefficient of friction		ASTM D1894	0.15
		coefficient of friction	coefficient of friction		ASTM D1894	0.050
Wear factor		ASTM D3702	1.4 10^-8mm³/N·m
	Wear factor		ASTM D3702	14 10^-8mm³/N·m
		Wear factor		ASTM D3702	26 10^-8mm³/N·m
		Wear factor	Wear factor		ASTM D3702	35 10^-8mm³/N·m

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ASTM D256	270 J/m

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTM D257	4E+17 ohms
Volume resistivity		ASTM D257	8E+15 ohms·cm

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D648	280 °C
thermal conductivity	ASTMC177	0.65 W/m/K
Linear coefficient of thermal expansion	ASTM D696	2.5E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top