
PC 1300G U3386 ASAHIKASEI SHENZHEN
21
Form:Granules
Properties:
Rapid crystallizationLow warpageLow deformability
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | Rapid crystallization | Low warpage | Low deformability |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | 干 | ASTM D-2863 | 26 | % |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 湿 | 2.2 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | 干(湿) | ASTM D-790 | 128(59) | Mpa |
| Impact strength of cantilever beam gap | 干(湿) | ASTM D-256 | 39(108) | J/m |
| flexural coefficient | 干(湿) | ASTM D-790 | 3.0(1.3) | GPa |
| tensile strength | 干(湿) | ASTM D-638 | 88(67) | Mpa |
| Elongation at Break | 干(湿) | ASTM D-638 | 35(200) | % |
| Rockwell hardness | 干(湿) | ASTM D-785 | 85(60) | M Scale |
| 干(湿) | ASTM D-785 | 120(110) | R scale | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| specific heat | 干 | 1670 | J/(kg.k) | |
| Hot deformation temperature | 1.82MPa,干 | ASTM D-648 | 75 | °C |
| 0.46MPa,干 | ASTM D-648 | 240 | °C | |
| Linear coefficient of thermal expansion | 干 | ASTM D-696 | 8 | |
| thermal conductivity | 干 | 0.2 | W/(m.K) | |
| UL flame retardant rating | 干 | UL 94 | V-2 | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 干 | 旭化成方法 | 0.9-1.6 | % |
| Wear factor | 湿 | ASTM D-1044 | 6 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.