PP H-XD-140 Jinling Petrochemical

Properties:
Type
general category
Usages:
Purpose
injection molded modified plastics
Compare

Technical Data Sheet

Basic performance	Test Condition	Test Method	Test Result
Apparent density			优级｜0.43 g/cm3
	Apparent density			一级｜0.41 g/cm3
	Apparent density	Apparent density			合格｜0.38 g/cm3
melt mass-flow rate			优级｜10.1-19.0 g/10min
	melt mass-flow rate			一级｜10.1-19.0 g/10min
	melt mass-flow rate	melt mass-flow rate			合格｜10.1-19.0 g/10min

Other performance	Test Condition	Test Method	Test Result
ash content			合格｜350 mg/kg
Fluorine content			优级｜100 mg/kg
Fluorine content	Fluorine content			一级｜100 mg/kg
Volatile compounds			优级｜0.20 %
	Volatile compounds			一级｜0.20 %
	Volatile compounds	Volatile compounds			合格｜0.20 %
isotactic index			优级｜96 %
	isotactic index			一级｜96 %
	isotactic index	isotactic index			合格｜94 %
ash content			优级｜150 mg/kg
ash content	ash content			一级｜250 mg/kg
Fluorine content			合格｜100 mg/kg

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength			优级｜31.5 Mpa
	tensile strength			一级｜31.5 Mpa
	tensile strength	tensile strength			合格｜31.5 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top