PP 3210G6 HUIZHOU NPC

Form：Granules | Grade：Enhanced level | Filler：glass fibre 30 %

Properties:

High rigidityGlass fiber reinforcedhigh strengthheat-resistingLow shrinkage30% glass fiber reinforceHigh rigidityLow shrinkageHigh mechanical strengthHeat resistance

Typical Applications:

Household appliancessmall home appliancesShellBobbinPump casingController housingHome appliance products etc

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Household appliances \| small home appliances \| Shell \| Bobbin \| Pump casing \| Controller housing \| Home appliance products \| etc
Properties:	High rigidity \| Glass fiber reinforced \| high strength \| heat-resisting \| Low shrinkage \| 30% glass fiber reinforce \| High rigidity \| Low shrinkage \| High mechanical strength \| Heat resistance
Filler:	glass fibre 30%

Certificates

TDS

Technical Data Sheet

CONDITION	Test Condition	Test Method	Test Result	Test Unit
Pre drying time		-	1	hrs
Pre drying temperature		-	100	℃
Barrel temperature (later stage)		-	220	℃
Material barrel temperature (middle section)		-	225	℃
Barrel temperature (front section)		-	225	℃
Nozzle temperature		-	230	℃
Mold temperature		-	50	℃
Pressure		-	400-800	kg/cm2
Screw speed		-	180	rpm
Injection speed		-	快	-
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		DSC	165	℃
Hot deformation temperature	4.6kg/cm2	ASTM D-648	155	℃
melt mass-flow rate	230℃,2.16kg	ASTM D-1238	8.5	g/10min
Physical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D-638	800	kg/cm2
Elongation at Break		ASTM D-638	3.5	%
bending strength		ASTM D-790	1200	kg/cm2
Bending modulus		ASTM D-790	49800	kg/cm2
Izod Notched Impact Strength		ASTM D-256	8.5	kg·cm/cm
Rockwell hardness		ASTM D-785	88	R
density		ASTM D-792	1.12	-
Shrinkage rate	3mm厚度，MD	内部标准	0.2~0.6	%
Shrinkage rate	Shrinkage rate	3mm厚度,TD	内部标准	0.4~0.8	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D-257	10^16	Ω·cm
Dielectric strength (1mm)		ASTM D-149	40	KV/mm
Dielectric constant (10 ^ 6HZ)		ASTM D-150	2.4	-
Loss factor (10 ^ 6HZ)		ASTM D-150	---	-
Arc resistance		ASTM D-495	130	sec
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL94 flame retardant rating	0.75mm	UL 94	HB	-

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top