PC 500R-13021 SABIC INNOVATIVE US

Form：Granules

Properties:

enhanceGlass fiber reinforced Glass fiber reinforced b

Typical Applications:

Fiber grade

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Fiber grade
Properties:	enhance \| Glass fiber reinforced \| Glass fiber reinforced b

Certificates

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ASTM D-570	0.12	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D-790	3445	Mpa
Impact strength of cantilever beam gap	23°C	ASTM D-256	107	J/m
Rockwell hardness		ASTM D-785	124
tensile strength	Break点	ASTM D-638	55	Mpa
bending strength		ASTM D-790	103	Mpa
tensile strength	Yield点	ASTM D-638	66	Mpa
elongation	Break	ASTM D-638	15	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion		ASTM E-831	3.2×10	1/°C
Vicat softening temperature		ASTM D-1525	154	°C
Hot deformation temperature	0.45MPa	ASTM D-648	146	°C
Long term use temperature		UL 746B	130	°C
Hot deformation temperature	1.8MPa	ASTM D-648	142	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	3.2mm	ASTM D-955	2-4	10
UL flame retardant rating		UL 94	5V
density		ASTM D-792	1.25
UL flame retardant rating		UL 94	V-0
UL flame retardant rating	UL flame retardant rating		UL 94	1.5	mm
enhance			10	%
Dissipation factor	60Hz	ASTM D-150	0.0008
UL flame retardant rating		UL 94	3.0	mm
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D-257	1.0×10	Ω.cm
Dielectric constant	60Hz	ASTM D-150	3.1
Dissipation factor	1MHz	ASTM D-150	0.0075
Dielectric constant	1MHz	ASTM D-150	3.05

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top